Wrap Around Pinny Finished

This is one of those sewing projects that stalled and would not restart for some time.  It was nearly finished for ages but now it is really finished.

If I had a dress form I could have shown this off a little better but the coat hanger give some idea.  The pinny crosses over at the front and ties with a slim bow at the back.

The two ties are secured at the waist with a rectangle of topstitching on the inside of the pinny.

The tie on the left front passes through a small gap in the side seam under the armhole on the righthand side of the pinny.  I reinforced this with some back and forward stitches rather than a worked buttonhole.  This is a utility garment after all.

The stalling point for me was the bias binding.  There must be about five yard of the stuff on this garment.  I made my own and first tried to attach it with the vintage binding foot on the Singer 99K.  The straights went well but it struggles with sharper curves and crossing seams.  I had to unpick the dodgy bits and go back over them with the regulars straight stitch foot.

I didn't even attempt it on the armholes.  I went out and bought a bias binder maker which is loads of fun to use and attached the binding by pinning and sewing once through all five layers.  Not the finest of finishes but fine for doing the dishes in.

Not that I will be wearing it for washing the dishes or scrubbing the front step.  It's far too small.  It has however provided me with practice using bias binding and probably the confidence to have a go at making a dressing gown sometime soon.

Wrap Around Pinny

The instructions on how to create the pattern pieces are very clear and quite simple.  The garment is made up of three pattern pieces which are easy enough to draft.  I found my 24x6 quilting ruler useful.  I used squared pattern paper but as my instructions were imperial and my grid metric this was a questionable benefit.  Inch square paper doesn't seem to be that easy to find in the UK anymore.  A French curve might have been handy for the armholes and neck line but I made a passable free handed attempt.

One of my sister's neighbours was kind enough to send me a good sized bundle of fabric she no longer wanted.  These two fabrics were included.  The yellow is 100% cotton printed with a design called "Seagull" as well as gulls the motifs include starfish and sea shells.  The blue deck chair stripe feels more like poly-cotton and had been hemmed as [Wendy House?] curtains in the past.  I didn't have enough of either to make anything large but I thought the two designs worked well together in a seaside-y kinda way.  I estimated that I would have enough fabric to piece the pinny with enough of the blue stripe left over to make the bias binding for the armholes and edging.

I elected to use the diminutive Singer 99K for this project.  I hadn't touched it since I altered my ironing board cover so I thought it was owed a spin.  As you will have seen from Saturday's post the designated sewing space is far too messy to use so I opted for the dinning table for this project.  The 99K is also the easiest machine I have to carry over there.  The blue poly-cotton is a good bit lighter than the Seagull cotton and has a tendency to pucker.  I improved matters greatly by backing off the tension about three-quarters of a turn.  The pattern includes a "⅜ inch turning".  I guess that is 1940s speak for seam allowance.  Interestingly my seam guide has a default setting for a perfect ⅜ inch seam allowance when set up as below.  Was this once some kind of dressmaker's standard I wonder?

I tried my hand at directional sewing.  Starting at the hem and sewing toward the waist.  Did I get it right?

Regular readers will know what a fan I am of flat felled and French seams but both of those options felt a little bit over engineered for a pinny so I decided to try a technique I had read about in a few different places on the internet.  I think it was probably a post on someone else's blog, which I now can't find, which put the idea of this kind of seam finish and domestic work wear together in my head.  I gather that this was a common seam finish in the days before zigzag sewing machines or over lockers.  It is very simple to do you just make a line of stitching within the seam allowance.  The stitches are supposed to act as a barrier to fraying.  I used the ⅛  side of the presser foot, against the edge of the seam allowance as a guide for my row of stitches.  On a ⅜ seam allowance this means that the ¼ inch side of the foot was against the middle of the seam.  Neat or what?  I love it when a plan comes together.  A more upmarket looking variation on this theme, which I have yet to try, suggests turning the raw edging of the seam under and then stitching.

The only down side to using this seam finish is that you end up sewing each seam three times.  The skirt of this pinny calls for no fewer than ten (yes ten!) separate panels (or should that be gores?) so I had the little 99K really chattering away to itself.

So now I have to make yards of bias binding and some apron strings.  Watch this space.

Did your granny wear one of these?

I don't recall my Gran wearing a traditional apron.  I remember her occasionally wearing a mauve overall (which has a nice consonance).  There is even photographic evidence of this garment somewhere at my mother's house.  Where I grew up butchers, joiners and freemasons wore aprons whereas Mams, Mothers, Grans and Grannies wore pinnies.  My own Mam had a rather fetching vinyl/oilcloth number with Superwoman (yes Super not Wonder) on it.

I am seldom certain of what motivates me but while I was on holiday I decided that, when I got home, I was going to make what I thought was called "a cross over pinny".  So I googled that phrase and was more or less thwarted by my NW UK English usage.  After further lateral searching I discovered that what I was really looking for was a pinafore.  This surprised me because I thought a pinafore was a dress. I was convinced of this because I remember my Mam sewing them for my sister.  She would ware a polo neck sweater underneath.  They were the girl equivalent of my dungarees.

I often discuss things with The Much Belovéd and this proposed project was no exception.  Now he grew up on the other side of the Atlantic, far away from our red brick man traps with their scrubbed steps, and when I told him what I had in mind he had some difficulty understanding me.  After further discussion we established that down his alley what I call a pinafore dress is a jumper, a UK pinafore is a US house dress, an English overall is a North American cover all and an apron is an apron.  Are we all singing from the same hymn sheet?  Great!

Thanks to actresses like Irene Handle...

 .........Kathy Staff... 

...and Jean Alexander this garment looms large in the psyche of one born in the late 1970s and weened on a diet of British television during the 1980s.

However this garment does not loom large in the psyche of internet search engines and sewing patterns, never mind free sewing patterns, for such garments are few and far between.

I did however manage to track down an inexpensive PDF explaining how to create your own pattern and construct a pinny from scraps. You can find it here if you are interested and if you are really interested you can tune in here soon to find out how I got on with it.