Patchwork peg bag

After years of flat-dwelling, one of the nicest things about living in a house, with a garden, is the ability to dry clothes on a line.  The wonderful smell of freshly laundered sheets blown dry by a sunlit spring breeze!  But this means pegs.  We had the pegs laying around in the bottom of the clothes basket for a few months before I came across the perfect pattern for a peg bag in a magazine.

Here is my version.  The front is made up of four strips of scrappy patchwork which is pieced first to make panel which can be cut down to shape and size.

The patchwork front panel is lined with a cream-coloured honey bee print cotton left over from another project.

I used an oh so simple straight stitch to finish the seam allowances together.

The hook and crossbar are taken from a child's clothes hanger.  Usually hangers are curved.  This one happened to be straight but is easy enough to shape the top of the bag to suit whatever you have to hand.  A gap in the seam at the top centre of the bag allows the hook to protrude.  Very useful to hang the bag on the line leaving hands free for the washing.

The back is a single piece but could just as easily be patchwork if you had the inclination.  I rather love this cheerful little bag.

You say pants but I say trousers

A few months ago The Much Belovéd arrived home with two new pairs of trousers both of them of the long unfinished hem variety.

"Would you be able to shorten these for me please?" he asked.

"Yes of course darling.  I would be delighted to help you with that."  I replied knowing full well that I have never pinned or hemmed expensive wool trousers before in my life.  The last time TMB got a tailor to do this for him I was less than complimentary about the outcome so let us just say that failure, on this occasion, would not be an option.

I have restitched the hems of my own trousers on the odd occasion when then have needed repair but I have never tackled the whole job from scratch and I knew I was going to need to top notch guidance on exactly what to do.

I turned to my copy of Roberto Cabrera and Patricia Flaherty Meyers, 'Classic Tailoring Techniques: A Construction Guide for Women's Wear', (New York 1984).  This may seem an odd choice as I was altering gent's trousers but at the time I wanted to buy Cabrera's book the Menswear version was rather hard and or expensive to track down.  It was republished towards the middle of last year so I now have a copy of both.  The instructions are concise but clear and equally applicable to trousers worn by men or women.

I had TMB try the trousers on with a pair of shoes and pinned up the legs so that the hem reached roughy the middle of the back of his shoe and broke gently on the instep at the front.  Cabrera and I both agree that this is the right length for trousers some modern retailers disagree and favour the concertina look!  I got him to walk around a bit, look in the mirror and try sitting down to get his approval on the length before he took the trousers off again.

The next step was to mark the fold of the hem on the right side using chalk.  Wow! Chalk really works much better on wool flannel than it does on cotton poplin.  The amount left was obviously far too much to turn under as a hem I would have to cut some of the fabric away.

So I chalked another line about two inches below...

Took a deep breath and chopped.  I was VERY nervous about cutting into these but needs must.  I didn't really like the way that my nice clean cut edge began to fray so quickly.  Maybe I should have used the pinking shears but I hadn't so there you go.  I used the scraps to trial a machine zigzag to finish the raw edge but I didn't like the outcome.

I opted instead for something decidedly more old school.  Over casting the edge by hand.  This is a technique I had seen in an online reproduction of a very old leaflet on seam finishes.  It took a bit of time but it sewing by hand without a deadline is very therapeutic, especially when the daylight is good.

I turned the trouser leg inside out and pinned the hem back up along the chalked fold line.

And then tacked the the hem up keeping the stitches about an inch down from the top of the hem.  A really great tip is to insert a piece of cardboard into the trouser leg to stop yourself from tacking one side of the leg right through to the other.  I used part of a cereal box.

Then I turned the trousers right side out again and steam pressed the hem flat - nice!

Then I stitched the hems by hand trying to keep my stitches small enough to be invisible and loose enough not to pucker.  The result was perhaps not the work of a master tailor but I was satisfied and even better than that so was the prospective wearer.  On balance I really enjoyed the challenge.  Working with wool was a nice change and I am sore tempted to set to and sew myself a pair of tailored trousers sometime during 2016.

Disappearing Nine Patch - Part II

I have sewn all of the three patch rows into nine patch blocks - nine of them in total.  The blocks are all basically the same with a red value patch in the middle and a 'colour' at each corner.  The remaining blocks are cream.

Having spent several hours carefully sewing these patches together I am about to cut them up.  Yes!  That's right - I haven't gone mad.  I made one cut vertically down the centre of the block using the seam line to help me.  The cut has to be made two and a quarter inches from the seam.  Another cut is then made horizontally across the block again two and a quarter inches from the seam lines.

Now the nine-patch block is separated to make four asymmetrical four-patch blocks.  I repeated these cuts on the remaining eight nine-patch blocks.

The result is 36 four-patch blocks - six of each colour.

These blocks have gone together very quickly.  Since I shortened the belt on the Singer 201K it hasn't slipped once and the machine, which was fairly enjoyable to sew with, has become a joy to use.

Disappearing Nine Patch - Part I

I have decided to start my sewing year with a quilt.  I've spent quite a while thinking about what I want to do with fabrics I already have and in the time I have available.

I have been reading up about disappearing nine patch quilts here, here and here.  I was taken with the setting which imitates sashing and corner stones and decided that might work with the fabrics I have to hand at the moment.

Working from the premise that my individual squares would be cut at five inches based on the common size of commercially available charm packs I began to do some sums.

My quilt will be made up of nine nine patches that's 84 individual squares which would equate to two commercial charm packs at 42 squares each.  These will be made up of:

• Nine red for centre of the nine patch blocks - these will become the corner stones
• Thirty-six cream for the middle patches on each side of the blocks - these will become the sashing
• Thirty-six coloured prints for the corner patches of each block - I cut six of each from six different fabrics

Here are all the squares cut out nice and tidy - a couple of hours work over a couple of evenings last week.  Speed is of the essence with this project as I don't have loads of time and I need to keep the momentum up.

The next step was to chain piece nine red squares to nine cream and then set aside nine cream for later.

I am working on the Singer 201K1.   I have read that this is the correct designation for a Kilbowie built machine originally fitted to a treadle.  I recently shortened the belt on this one.  It has made a world of difference.  The belt must have stretched making it tricky to get the machine to start and stop.  It had a tendency to run backwards at the beginning, run-on when stopping and stalling altogether when crossing thicker seams.  I took about 3/8ths of an inch off the length for the time being and now the machine is performing faultlessly.

The thread is Gütermann 100% cotton and the machine is set to 15 stitches per inch. I used my trusty cloth guide to help maintain a scant quarter inch seam.  I chain pieced the 18 remaining cream coloured squares to 18 of the mixed colours, three of the six different fabrics.  This is the resultant heap of chain piecing.

I snipped the paired squares apart and had a bit of a tidy up.  Here are the paired up squares stacked on the treadle table prior to pressing.  I production lined my pressing.  Pressing all 27 pairs as sewn and then open with all seams away from the cream squares.  I tried letting all my pressing cool on the ironing board before moving the units.  I'm told it helps the pressed seam allowances stay put.

My next step was to add the remaining nine cream squares to the opposite edge of the red ones.

And then the remaining 18 mixed colours to the other pairs.  Selection of the mixed prints at this stage isn't too crucial.  The reason for this will become clear next time.

Much more pressing and the nine patches are starting to take shape!  From winding the bobbin to taking the last photograph took just under three hours.  A nice way to spend a blustery Sunday afternoon.