Baby Fence Rail Quilt - Pt VII: The Big Finish

The Baby Fence Rail Quilt is finished.  It's new owner came to collect it yesterday afternoon an hour or two after I had put the last stitches into the binding.  It was the first time Bill and I had met baby Georgia, who is just four weeks old, and we were captivated

Please excuse my ankles

I wasn't feeling game enough to do the quilting on the Singer 201K and defaulted to my 'go to' quilter the Singer 401K fitted with the walking foot.  I used the same putty-coloured thread to secure the layers as I had used to piece the quilt top.  It shows up better from the back.

The fence rail blocks finished at six inches and used the corners of these blocks are the reference point for the diagonal lines of quilting over the central part of the quilt.  In this way the lines of quilting are four and a quarter inches apart which should be a nice density for a baby quilt.  I quilted in the ditch around the inner border.

This picture shows how well Bill's choice for the backing fabric works.  I think it pops without clashing.  When I was binding the quilt I wanted to do this in exactly the same way I bound the Log Cabin quilt earlier in the year.  I had the blog to remind me but I hadn't been very detailed.  I couldn't for the life of me recall which machine I had used to sew the binding onto the front of the Log Cabin quilt.   So here is a note to myself for future reference:

• For the fence rail quilt I used the 401G with the walking foot to sew the binding onto the front of the quilt
• I left eight inch tails at the beginning and of the binding which really made it a lot easier to join them together later
• I then used a size three between and a ladder stitch to sew the binding onto the back of the quilt using the line of machine stitching from the front as a guide for my hand sewing - yet again this took me hours but I still feel it's time well spent.  After all this is a gift for a very special little bundle.

A well-padded friend maybe just as cuddly as a quilt

Has anyone ever heard of a Hussif?

I hadn't until I was chatting to follower Ken a week or two ago.  I thought I knew what he was talking about until Monday when I treated myself to a copy of the Merchant & Mills SEWING BOOK.  When I saw a photograph of their project Hussif I realised the picture I had in my head was well off beam.  It turns out that a Hussif is a pocket sewing kit with some whimsical etymology thrown in for good measure.

I am rather taken by the Merchant & Mills SEWING BOOK.  It's an aesthetically pleasing object in its own right and the projects inside are, for the main part, non-gender-specific which makes a welcome change for the male seamster.

As a confirmed old bachelor with some heavy unbleached calico on his hands I figured that a Hussif is the nearest I am likely to get to a housewife and resolved to knock one up [perhaps I should rephrase that!?]

Here are some pictures of my version

There are seven pockets for bits and bobs sewing notions.  I made mine the same size as the instructions but the book encourages makers to adjust pocket sizes to fit the objects in their own sewing kit.  The striped ticking covers two layers of cotton quilt wadding which form a pin cushion cum needle case.

Here is the Hussif all furled up and tied shut.  To give you an idea of size the cotton webbing tape is 25mm (yes I've gone metric today) or one inch wide.  I may trim the tape down a bit once things have stretched out a bit.

The first of two big adventures in making this project was printing the downloadable Merchant and Mills graphic onto what can only be described as magic paper and then transferring this to the front of the Hussif using the iron.

I think I may have overcooked the transfer slightly and the instructions on where to position it were not Gavin-proof (I may have got the graphic upside down) but overall I am pleased with the effect.  I am left with some mixed feelings about putting a company logo onto an item I have made but I like the look of the finished project and I have tried out something I never would have done otherwise.  My mind is now teaming with ideas for some kind of Oil & Thread transfer.  Possibly featuring a hen if I can find copyright free image to use.

Adventure number two is a Singer 401G related discovery and one for the seam guide junkies amongst us (you know who you are).  I have discovered that the toe of the general purposes foot can be made to sit under the seam guide.  This is shown in the section of the Manual which shows how to blind stitch hems using the "BO" setting.  I realised that, with the needle centred (red lever at position 3), this gives scant ⅛ seam allowance.

When would want a scant ⅛ seam allowance?  Well I found it handy when edge stitching the Hussif.  I hope you agree that the results are pretty tasty.

I am planning to hold on to this particular Hussif myself.  I have something in mind for it.  I really enjoyed putting this together.  It's a good way to spend a Saturday afternoon.  At this point in September I am thinking that one or two of these, filled with some 'heritage' style notions might make good Christmas presents.

Baby Fence Rail Pt VI

A couple of weekends ago I finally got to the shops to buy some wadding (batting) so that I can finish the Baby Fence Rail quilt.  That was the easy part.  I still needed to choose a backing fabric (remember the green stuff I bought for the purpose and then turned into a shirt?).  After trolling the streets of London for an hour or two I settled on some cassis-coloured (that's pale purple to you and I) cotton sateen lining fabric.  Surprisingly the colour combination works.

Having bought the missing ingredients I discovered new enthusiasm for this quilt.  So I wasted no time and gave the wadding a bath!  This is supposed to remove excess cotton oil which could mark the quilt and to preshrink the wadding.  Some people do and some people don't.  I guess I am just one of those guys who do.

With the wadding and backing fabric washed, preshrunk and dried I layered the quilt sandwich in the usual way.  Pausing only to spend a few minutes deliberating over the right/wrong side of the cotton sateen.  I decided to put the shiny side out.  I thought that this would feel nicest if anyone should try sleeping under the quilt.

When I sandwiched the Log Cabin quilt one of my readers was rather alarmed by how few pins I used in my basting and I solemnly swore to use more on my next project.  I even bought some fancy curved safety pins.  I basted at approximately four inches or less and here is a photograph to prove it.  I must confess that the whole thing feels a lot firmer and I am hoping it will make the quilting process easier.

Now for the really big news.  In an exclusive announcement made this evening our spokesman can confirm that this quilt will be quilted OUT of THE DITCH!!

I have started to mark the quilt top with inch wide masking tape.  I am going to quilt the centre of the quilt with a diagonal cross hatched grid.  Tomorrow, with a fair wind, I may get the Singer 401G out and lay down that first row of quilting...

Seam Guidance or This one's for Matt C

Of all the sewing machine accessories I own (and they have rather mounted up here over the last year) the one I use the most is my seam guide.  This is probably because I use old black sewing machines with no markings on their throat plates.  To the best of my limited knowledge there are two basic types of seam guide.  The first is quite heavy, T-shaped, and pictured left.  This is the kind that tends to come with black japanned Singers with gold decals.  The second is made of lighter pressed metal and plastic and tends to be found with the later tan, pale green and duck egg coloured Singers.

Early type Singer seam guide

Later type Singer seam guide

Both types will screw into either hole in the machine bed of a black Singer sewing machine [say a Singer 66 for instance Matt]  I've taken pictures just to prove my point.  Notice that the later type can be swivelled about to allow for sewing curved seams.

If you have a zig-zag machine you can also use this type of seam guide to help with making a blind hem.  I haven't done it yet myself but this operation is on my experimental to-do list

Now this is not, as you might think, a six inch/15 cm ruler.  It is, in point of fact, a knitting and sewing gauge.  I know this because it has this written on one end of it.  This gadget, with its sliding marker, has a number of uses.  I use it a lot to set up the seam guides on my black Singers, none of which have markings on their throat plates.

Sewing and knitting guage

Now although these old Singer are not marked in the way that a modern machine would be there are landmarks if you know how to read them.  I've tried to illustrate the first here.  This is the front one of the two screws which actually hold the throat plate on to the bed of the machine.  Check out the seam gauge.  If you use the right edge of this screw as a reference point you'll be sewing a quarter inch seam allowance.  This is useful for those who piece quilt tops and other patchwork projects.

The next land mark is the mystery hole nestling snugly in the D-shaped throat plate.  Don't look for one of these if you have a VS machine like a Singer 28, 27, 128 or 127 because I don't think you will find one.  I'm not entirely sure what the intended purpose of this hole is.  I think it might be something to do with an under-braiding attachment sold by Singer.  The other interesting fact is that by using this hole as a seam guide you will be sewing a ⅝ seam which just so happens to be the industry standard for home sewing patterns.  Don't believe me?  Check the sewing gauge - handy eh?

Now, without the aid of the seam gauge, if you have the older type of seam guide and thumb screw you have two useful default settings.  The first I wrote about last time is for a ⅜ seam allowance and the second is achieved in the following way.  Set the thumb screw in the threaded hold nearest the throat plate and position the flat side of the seam guide as close to the thumb screw as possible.  This creates a spacing of one inch.  I suspect that this might well come in handy for turning hems.

Some people have seam guides and use them, some people have sewn beautifully for decades and have never seen a seam guide never mind used one.  They were a standard in the accessory boxes for Singer sewing machines so millions must have been stamped out over the years.  Bear this in mind if you are going to buy one.  I wouldn't want pay more than a couple of pounds for one.  It might be more cost effective to buy a job lot of accessories that include a seam guide - mixed lots turn up regularly on ebay.  If you can find one to buy cheaply or, even better, get one given to you you will have an easy to use accessory which will really earn its keep.

In parting I leave you with a link to one of Muv's (of Lizzie Leonard Vintage Sewing fame) excellent video tutorials.  If you're not familiar with her videos and blog check them out.  They are a priceless source for the care and use of vintage machines!  I cannot recommend them enough!

Wrap Around Pinny

The instructions on how to create the pattern pieces are very clear and quite simple.  The garment is made up of three pattern pieces which are easy enough to draft.  I found my 24x6 quilting ruler useful.  I used squared pattern paper but as my instructions were imperial and my grid metric this was a questionable benefit.  Inch square paper doesn't seem to be that easy to find in the UK anymore.  A French curve might have been handy for the armholes and neck line but I made a passable free handed attempt.

One of my sister's neighbours was kind enough to send me a good sized bundle of fabric she no longer wanted.  These two fabrics were included.  The yellow is 100% cotton printed with a design called "Seagull" as well as gulls the motifs include starfish and sea shells.  The blue deck chair stripe feels more like poly-cotton and had been hemmed as [Wendy House?] curtains in the past.  I didn't have enough of either to make anything large but I thought the two designs worked well together in a seaside-y kinda way.  I estimated that I would have enough fabric to piece the pinny with enough of the blue stripe left over to make the bias binding for the armholes and edging.

I elected to use the diminutive Singer 99K for this project.  I hadn't touched it since I altered my ironing board cover so I thought it was owed a spin.  As you will have seen from Saturday's post the designated sewing space is far too messy to use so I opted for the dinning table for this project.  The 99K is also the easiest machine I have to carry over there.  The blue poly-cotton is a good bit lighter than the Seagull cotton and has a tendency to pucker.  I improved matters greatly by backing off the tension about three-quarters of a turn.  The pattern includes a "⅜ inch turning".  I guess that is 1940s speak for seam allowance.  Interestingly my seam guide has a default setting for a perfect ⅜ inch seam allowance when set up as below.  Was this once some kind of dressmaker's standard I wonder?

I tried my hand at directional sewing.  Starting at the hem and sewing toward the waist.  Did I get it right?

Regular readers will know what a fan I am of flat felled and French seams but both of those options felt a little bit over engineered for a pinny so I decided to try a technique I had read about in a few different places on the internet.  I think it was probably a post on someone else's blog, which I now can't find, which put the idea of this kind of seam finish and domestic work wear together in my head.  I gather that this was a common seam finish in the days before zigzag sewing machines or over lockers.  It is very simple to do you just make a line of stitching within the seam allowance.  The stitches are supposed to act as a barrier to fraying.  I used the ⅛  side of the presser foot, against the edge of the seam allowance as a guide for my row of stitches.  On a ⅜ seam allowance this means that the ¼ inch side of the foot was against the middle of the seam.  Neat or what?  I love it when a plan comes together.  A more upmarket looking variation on this theme, which I have yet to try, suggests turning the raw edging of the seam under and then stitching.

The only down side to using this seam finish is that you end up sewing each seam three times.  The skirt of this pinny calls for no fewer than ten (yes ten!) separate panels (or should that be gores?) so I had the little 99K really chattering away to itself.

So now I have to make yards of bias binding and some apron strings.  Watch this space.

Did your granny wear one of these?

I don't recall my Gran wearing a traditional apron.  I remember her occasionally wearing a mauve overall (which has a nice consonance).  There is even photographic evidence of this garment somewhere at my mother's house.  Where I grew up butchers, joiners and freemasons wore aprons whereas Mams, Mothers, Grans and Grannies wore pinnies.  My own Mam had a rather fetching vinyl/oilcloth number with Superwoman (yes Super not Wonder) on it.

I am seldom certain of what motivates me but while I was on holiday I decided that, when I got home, I was going to make what I thought was called "a cross over pinny".  So I googled that phrase and was more or less thwarted by my NW UK English usage.  After further lateral searching I discovered that what I was really looking for was a pinafore.  This surprised me because I thought a pinafore was a dress. I was convinced of this because I remember my Mam sewing them for my sister.  She would ware a polo neck sweater underneath.  They were the girl equivalent of my dungarees.

I often discuss things with The Much Belovéd and this proposed project was no exception.  Now he grew up on the other side of the Atlantic, far away from our red brick man traps with their scrubbed steps, and when I told him what I had in mind he had some difficulty understanding me.  After further discussion we established that down his alley what I call a pinafore dress is a jumper, a UK pinafore is a US house dress, an English overall is a North American cover all and an apron is an apron.  Are we all singing from the same hymn sheet?  Great!

Thanks to actresses like Irene Handle...

 .........Kathy Staff... 

...and Jean Alexander this garment looms large in the psyche of one born in the late 1970s and weened on a diet of British television during the 1980s.

However this garment does not loom large in the psyche of internet search engines and sewing patterns, never mind free sewing patterns, for such garments are few and far between.

I did however manage to track down an inexpensive PDF explaining how to create your own pattern and construct a pinny from scraps. You can find it here if you are interested and if you are really interested you can tune in here soon to find out how I got on with it.

All of the things that stopped me blogging

Hello readers!

What's that I hear?  Total silence?  There are probably none of you left as I haven't posted a word since I finished the Negroni shirt back in June.

Negroni shirt being worn on Cape Cod

So what has been happening since then?  Well I left my job, moved house, went on holiday, came back and started a new job.  So not much then really.

So the bad news is that I haven't had a lot of time to sew and therefore nothing much to blog and the good news is my new home has, or will have, a designated sewing space.

This muddle is my outstanding unpacking and the space will be the sewing room.

So the target for next week is to unpack, declutter, plan and arrange this room.  I still have an owl quilt to finish and that due date is getting closer and closer!